The Intoxilyzer® 900 is the industry’s NEWEST portable handheld EBT device. The I-900 has a rugged ergonomic design that, when paired to a Bluetooth thermal printer, gives the BAT flexibility of testing in the workplace or on the go. A large bright multi-color display and easy to use menu makes the I-900 effortless to use. PLUS, the I-900 automatically calculates the corrected value of the barometric pressure for you during the calibration process. DOT, NRC, and DOE protocols are all built-in to the device software.
866-835-0690
Features
Specifications
- Three testing modes: screening, confirmatory, and combination (includes screening and confirmatory modes with a 15-minute wait between the two when required)
- Rugged, lightweight case
- Portable design to allow for testing anywhere – both onsite and mobile
- Automatic wireless connectivity via Bluetooth up to 30 feet from breathalyzer
- Automatically adjusts for barometric pressure when using gas for calibration checks and adjustments
- Applicable Markets: Employee Testing (DOT, Non-DOT, NRC, and DOE)
Detector
Electrochemical fuel cell
Specificity
Fuel cell sensor is unaffected by acetone, paint and glue fumes, foods, confections, methane, and practically any other substance found in the human breath
Instrument Control
by microcontroller
Sampling
Automatic after the subject meets minimum flow and volume requirements
Accuracy
Meets DOT specifications for breath alcohol readings. Accuracy at the levels of 0.020 and 0.040
BAC is within +/- 0.005 BAC of the actual value.
Response Time
Within five seconds of sampling, depending on alcohol concentration
Display
Backlit graphics display
Audible Indicator
Beeper signals attention to changes in instrument status
Visual Indicator
Messages and prompts on instrument display
Calibration
Adjustment and checking by either dry gas or wet bath. Automatic barometric pressure sensing and compensation with dry gas.
Communications
Wireless communication with printer via Bluetooth
Memory
Stores up to 10,000 tests and calibrations including test number, date, time and result. Actual
number of stored tests varies based on data entry volume
Operating Temperature
23° to 104°F (-5° to 40°C) – automatically sensed and confirmed by instrument before proceeding with tests
Dimensions
3 1/4″ wide X 1 3/4″ deep X 6 3/4″ high (sensor) (8.3 cm wide x 4.4 cm deep x 17.1 cm high)
Power Supply
Four “AA” alkaline batteries
Testing Protocols Supported
1) U.S. Department of Transportation regulated, 2) non-regulated, 3) Nuclear Regulatory
Commission (HRC), 4) Department of Energy
Customization
User access to setup features that do not conflict with regulated protocols
Included with Each Instrument
Bluetooth thermal printer with rechargeable battery and charger, two rolls long life thermal paper, 10 mouthpieces, operator handbook, and storage case
